Setting The Language; Home Network; Resetting To The Factory Settings; Switching Demo Mode On Or Off - Thermador T18IW905SP Guide D'utilisation Et D'entretien

Setting the language

Press : button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Press ( button to move to the menu item
4.
Language.
Press : button.
5.
Use ( ) buttons to move to the required language.
6.
Press 8 button.
7.
The display restarts, and the start screen is
displayed.

Home network

You can use this function to establish a connection
between the refrigerator and your mobile device.
~ "Home Connect" on page 14

Resetting to the factory settings

Press : button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Use ( button to move to the menu item Factory
4.
settings.
Press : button.
5.
A signal tone sounds, and a prompt to confirm
reset appears.
Press 8 button.
6.
All settings are reset to the factory settings.
Press ; button to exit the menu.
7.

Switching demo mode on or off

The cooling function of the appliance is switched off.
All other functions can be used.
Note: Do not store any food items in demo mode as
the appliance remains at room temperature.
Press : button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Use ( button to move to the menu item Demo
4.
mode.
Press : button.
5.
Use ( ) buttons to select the setting On or Off
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.
Operating the appliance en-us

Sabbath mode

All non-essential functions are switched off so you
can also use the appliance on the Sabbath.
The appliance switches off the following:
Automatic door opening
■
With handle-free installation, please note that
Note:
you will not be supported when opening the door
during this time.
To open the door in this case, reach from below
under the bottom panel of the unit.
Audible signals
■
Interior light
■
Messages on the control panel
■
Background illumination of control panel is
■
reduced
Switching Sabbath mode on or off
Displaying Sabbath mode in the Settings menu
To use Sabbath mode, you first have to display the
function in the Settings menu:
Press : button to open the Settings menu.
1.
Use ( button to move to the Appliance settings
2.
menu.
Press 8 button.
3.
Use ( button to move to the menu item Sabbath
4.
mode.Press : button.
Use ( button to move to the menu
5.
item Available.Confirm by pressing 8 button.
Press ; button to exit the menu.
6.
The function is added to the Settings menu.
Switching on Sabbath mode
Press : button to open the Settings menu.
1.
Press › button to open the view Duration
2.
Sabbath mode.
Select one of the presettings, or change the
3.
duration with +/- buttons.
Press < button to start.
4.
The appliance switches all listed functions off.
Switching Sabbath mode off
After the selected time elapses, the appliance
■
switches over to normal operation.
To end Sabbath mode before the selected time
■
elapses, press = button.
13