Operating The Appliance; Switching The Appliance On; Switching Off And Disconnecting The Appliance; Setting The Language - Thermador T18IW900SP Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour T18IW900SP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en-us Operating the appliance

1Operating the appliance

S witching the appliance on
O p e r a t i n g t h e a p p l i a n c e
Press the main On/Off switch.
1.
The appliance starts cooling and the light is
switched on when the door is open.
Set the required temperature.
2.
~ "Setting the temperature" on page 10
Operating tips
When the appliance has been switched on, it may
take several hours until the set temperatures have
been reached.
The front sides of the housing are partly heated
slightly. This prevents condensation in the area
of the door seal.
Switching off and disconnecting the
appliance
Switching off the appliance
Press the main On/Off switch.
The appliance is no longer cooling.
Disconnecting the appliance
If you do not use the appliance for a prolonged
period:
Pull out mains plug or switch off fuse.
1.
The appliance is no longer cooling.
Clean the appliance.
2.
Leave appliance open.
3.

Setting the language

Press : button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Press < button to move to the menu item
4.
Language.
Press : button.
5.
Use < > buttons to move to the required
6.
language.
Press 8 button.
7.
The display restarts, and the start screen is
displayed.
10

Setting the temperature unit

You can choose between the unit °C and °F.
1° <=> 1 °F
1 °C <=> 1 °C
Press : button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Use < button to move to the menu item
4.
Temperature unit.
Press : button.
5.
Use < > buttons to move to the required unit.
6.
Press 8 button.
7.
The unit will be changed.
Press ; button to exit the menu.
8.

Setting the temperature

Recommended temperature
Wine storage cabinet:
Wine storage cabinet
To open the menu for setting the temperature,
1.
press the : button.
Use the m/
button to select the desired
2.
¢
compartment.
Keep pressing the +/- button until the display
3.
indicates the required temperature.
Confirm the selection by pressing the 8 button. If
4.
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.

Humidity

If bottles with natural corks are stored for longer than
4 weeks, the natural corks may shrink if the humidity
is too low.
To prevent this from happening, store old wine
bottles in such a way that the cork is kept wet and
increase the humidity.
Switching humidity on and off:
Press : button to open the menu for setting the
1.
climate zones.
Use m/
button to select the desired
2.
¢
compartment.
To switch on the higher humidity level, press
3.
button.
^
The
symbol appears in the display.
^
To switch off, press
[
The
symbol appears in the display.
[
Confirm the selection by pressing 8 button. If the
4.
button is not pressed, the appliance saves the
setting and automatically returns to the main
screen after a few seconds.
11 °C/52 °F
button.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T24iw900sp

Table des Matières