Publicité
Les langues disponibles
Les langues disponibles
WIRING
We recommend using 16 gauge (or larger) wire. The QS components are rated at 4 ohms and work
with any source unit or amplifi er designed to operate at a 4 ohm load. Make sure your source unit or
amplifi er is rated for 4 ohm operation.
Crossover in 2-way confi guration | One component set per channel
•
At least two amplifi er channels are needed for stereo operation (only one channel is shown)
woofer
source unit / amplifi er
Crossover in 2-way confi guration | Two component sets per channel
•
Requires two complete QS systems (four woofers, four tweeters, four crossovers)
•
At least two amplifi er channels are needed for stereo operation (only one channel is shown)
•
Crossovers wired in series
-
-MID+
2009 QS Multilingual h01.indd 5
2009 QS Multilingual h01.indd 5
+
-
-MID+
OUT
OUT
- IN
+
-TW+
source unit / amplifi er
crossover
+
OUT
OUT
- IN
+
-TW+
-OUT+
-
-
OUT
-MID+
- IN
- OUT
-
tweeter
-
OUT
+
-TW+
+
11/21/2008 10:54:28 AM
11/21/2008 10:54:28 AM
5
Publicité
