Input Menu - Fracarro SIG7710 Instructions D'emploi

Select a pre-
memorized c hannel
PRESET
INPUT
Select the LNB
remote power supply
Select the DiSEqC tone
Reading the frequency of
the local oscillator
IF frequency s etting
of the transponder
to be received
Symbol rate setting of
the transponder
to be received
FEC of the transponder
to be received
List of the available
channels
Confirm the settings by pressing the

5.2.4 INPUT MENU

OFF
LNB OFF
DiSEqC A
FREQ.OL (MHz) AUTO
FREQ.IF (MHz) 950
SYMBOL RATE 1000
FEC AUTO
CHANNEL LIST
PROGRAM 1
GO TO THE PROGRAM LIST MENU
pressing the S key after the modules programmation.
PRESET 1 PRESET 10
Enter by
Enter by
LOAD PRESET
SAVE PRESET
OFF
14V/0KHz
18V/22KHz
18V/0KHz
14V/22KHz
18V/22KHz
satellite A
satellite B
D
satellite C
satellite D
Read-only
2150
Increase/decrease from
TPE by using the arrow
keys, or enter the v alue
directly from the
40000
Read-only
1/N N/N
PROGRAM N
key; save the settings by
3
Loading ...
keyboard.
"Not available": transponder not
synchronized.
"NONE": s ervice ID not present