Network Lan - Fracarro SIG7710 Instructions D'emploi

9. Repeat all the programming operations for all the SIG7710 modules that will make up the headend.
After programming, all streamers can be connected to the main network (refer to the following CON-
NECTION OF THE SIG7710 MODULE TO THE LOCAL NETWORK paragraph).
NOTE: Presets are available for easy and quick SIG7710 settings (see follow menù).
WARNING: When you select PRESET you will change all the input settings parameters (frequen-
cy, channel streaming, etc.), but you will not change the IP address, the parameters of Multicast
streamer and the previous custom stored PRESET. When you select the FACTORY PRESET, in
addition to the input parameters you will also change the IP address and Multicast parameters
of the streamer, but you won't lost memories of presets.
6. CONNECTION OF THE SIG7710 MODULE TO THE LOCAL NETWORK
After programming, the module can be connected to the local LAN network by the CAT-5E patch cord.
01
HEAD
Line
PENTA85
CHVU4ZN
FR
DFP85
KPR41
SIG7901
SAT SAT
SIG7710
SIG7710
Head-Line Head-Line
IP IP
SIG7710
4
SIG7904
SAT SAT SAT SAT
SIG7710 SIG7710 SIG7710 SIG7710
Head-Line
Head-Line Head-Line Head-Line
IP IP IP IP
SIG7904 SIG7904 SIG7904 SIG7904 SIG7904
Head-Line Head-Line Head-Line Head-Line Head-Line

Network LAN