Inserting/Changing Batteries - ADE WS 1815 Mode D'emploi

Inserting/changing batteries

For use you require
LR03 (AAA), 1.5 V (included).
1. Open the battery compartment on the rear
side.
2. Insert the batteries as shown on the base of
the battery compartment. Pay attention to
the correct polarity (+/-).
3. Close the battery compartment again.
Suggestions for changing the battery:
‚ Battery change is necessary if the display
shows either a battery symbol
at all.
‚ Only use the type of battery that is specified
in the "Technical Data".
‚ Always exchange all of the batteries at the
same time.
‚ Dispose of batteries in an environmentally
appropriate way (see "Disposal").
As soon as the device is powered, a beep will
sound. Shortly thereafter, the display will show
the following values:
‚ Indoor temperature
‚ Humidity
‚ Comfort indicator
Digital weather station WS 1815
2 batteries of type
or nothing
33