Yamaha HY144-D-SRC Mode D'emploi page 10

• Audio can be transferred over distances up to 100 meters* between devices
using CAT5e network cables.
* Maximum practical distance may vary according to the cable used.
2 SYSTEM indicator
Indicates the operating status of the card.
Green
(lights)
Orange
(lights)
3 SYNC indicator
Indicates the sync status between the Dante network and the card.
Green
(lights)
Green
(flashes)
Orange
(lights)
10
HY144-D-SRC Owner's Manual
The card is working properly.
The card is booting. If this status continues for 30 seconds or
longer, the card has not booted correctly. Turn the power to the
RIVAGE PM system off and then back on again. If this does not
resolve the problem, have the card inspected by qualified
Yamaha service personnel.
The card is working properly as the clock slave on the Dante
network.
The card is working properly as the clock master on the Dante
network.
The card is not synchronized with the Dante network. Obtaining
network sync may take up to 45 seconds. If this status persists,
try the following steps. If these measures do not resolve the
problem, have the card inspected by qualified Yamaha service
personnel.
• Check the Dante settings and operation status by using the
Dante Controller.
• Turn the power to the RIVAGE PM system off and back on
again.
• Make sure that Ethernet cables have intact locking tabs.
• Replace the Ethernet cables with other ones.