Sony PCS-UC500 Mode D'emploi page 22

Using FarSite
When using PCS-4000P
Double click on "PCS-4000P",
then click on the [Invite] button.
"? You are being invited to a
conference called xxxx. Would
you like to attend?" message
appears on the monitor at remote
users. Then remote users click on
[Yes], the [PCS-XXXX PSTN:
NULL Waiting for response]
indication changes to [PCS-
XXXX PSTN: NULL Accepted].
8
Click on [Close].
9
Select [Share Workbook] and
[Share Application] from the
[Conference] menu.
The data conference can be held
now.
Note
There may be connected in a different
rate or not able to be connected
depending on the remote
parties'condition of the line or
terminal.
22
To check the T.120 rate
If the indication does not appear in
step 7 on previous page, do the
following operation to change the
T.120 rate of the FarSite after
checking the T.120 rate.
1
Select [OTHER] from MAIN
MENU.
The sub-menu appears.
P in P MULTI INPUT
QUICK GRAPH
DIAL MENU
2
Select [T.120].
The status of the T.120 rate is
indicated.
OFF 9.6K 38.4K
3
Select [EXIT].
MAIN MENU appears.
For details on changing the
transmission rate of the FarSite, refer
to the USER'S GUIDE supplied with
the FarSite package.
Notes
• The T.120 rate indicated in the
Rollabout Processor is the
transmission rate between the
Rollabout Processor and the PC. The
actual T.120 rate is slower than the
rate between Rollabout Processor
and the PC.
• Operating speed may be reduced
depending on the condition of the
line.
SETUP
STATUS
T.120
DIAL
CAMERA POINT AUDIO OTHER
END OF
MEETING
[OTHER]
EXIT