Setting Up T.120 Rate - Sony PCS-UC500 Mode D'emploi

Upgrading
8
Select [EXIT].
The SETUP menu appears.
9
Press the 6 memory card eject
button to eject the memory card.
Notes
• This card can be installed only once.
The card which has been already
installed in other Rollabout
Processors can not be used.
• Installed functions can not be
removed.
• If you have any problems about
installation, consult with your
authorized Sony dealer.
16

Setting Up T.120 Rate

Notes on using T.120
You cannot use the following
functions:
–Multi meeting function
–Sending/receiving the still image or
document data
–Controlling the camera unit at a
remote site
–Sending/receiving the user data even
if you set [T.120] to [OFF] to switch
the connection.
To set up [T.120] for sending
1
Select [OTHER] from MAIN
MENU.
The sub-menu appears.
P in P MULTI INPUT
QUICK GRAPH
DIAL MENU
2
Select [DIAL].
The DIAL LIST menu appears.
LIST
001 Boston branch
002 Montreal branch
003 Chicago branch
004 Seattle branch
005 Buffalo branch
006 Detroit branch
007 San Francisco branch
008 Miami branch
009 Toronto branch
010 Ottawa branch
DELETE SETUP MULTI PAGE
3
Select an index number for the
registration by using [>] and [.].
The selected index number turns
to blue.
SETUP
STATUS
T.120
DIAL
CAMERA POINT AUDIO OTHER
END OF
MEETING
[OTHER]
SELECTED
011 Dallas branch
012 Los Angeles branch
013 San Diego branch
014 New Orleans branch
015 Cleveland branch
016 Pittsburgh branch
017 Philadelphia branch
018 Atlanta branch
019 Denver branch
020 Memphis branch
SELECT DIAL EXIT