Transportation; Wintering; Storage - STERWINS 900 WT 24-4 Notice De Montage, D'utilisation Et D'entretien

Stop the pump
FR
• To reduce the risk of injury, always stop the machine :
ES
- before cleaning or clearing a blockage
- before installing or removing attachments
PT
- before checking, maintaining or working on the product
- if the machine starts to vibrate abnormally (inspect
IT
immediately).
EL
4.5 SPECIFIC FUNCTIONS
PL
Automatic function
Pressure will go down gradually as water is used. When the pressure falls below the minimum value, the
pump will start automatically.
RU

5. TRANSPORTATION

KZ
5.1 TRANSPORT THE MACHINE
UA
RO
EN
Always lift and carry the pump with the carrying handle. Protect the product from any heavy impact
or strong vibrations which may occur during transportation in vehicles. If you want to transport the
appliance on a vehicle secure it from slipping or vibrating. Secure the product to prevent it from slipping
or falling over.

6. WINTERING

Illustration 6.1 to 6.5
Follow all instructions given on chapter storage below.

7. STORAGE

7.1 STORE THE MACHINE
The instructions mentioned in the maintenance section must be carried out before any storage.
Illustration 6.1 to 6.3
• Completely drain the pump, allow it to dry and put back the two connector caps.
•
• Store the unit and its accessories in a frost-free place.
• The unit should always be stored in a clean, dry, ventilated place out of the reach of children. Ideally, the
temperature of the room in which the device is stored should be between 4 and 24°C.
• We recommend that you store the unit in an upright position, in its original package.
illustration 4.0
CAUTION In order to prevent accidents or injuries,
keep in mind the weight of the appliance during transport
(see Technical Data).
210