Madison MAD-LINK Manuel D'utilisation page 2

Safety instructions
Read, follow and keep these Instructions for future reference.
l
Do not use this apparatus near water.
l
Clean only with a damp cloth.
l
Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
l
Do not install near nay heat sources such as radiators, heat registers, stoves, or other apparatus (including
l
amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and
l
point where they exit from the apparatus.
Unplug this apparatus during lighting storms or when unused for long periods of time.
l
Refer all servicing to qualified service personnel. Serving is required when the apparatus has been
l
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
Description
1. M: Standby switch
2. CH: Switch between Wifi, AUX and USB mode
3. +/►►: Long press to increase volume/Short press ->Next song
4. ◄◄/- : Long press to decrease volume/Short press ->Previous song
5. ►‖ : Short press: play/pause. Long press: factory settings
ON/OFF: power button
WPS: set up a new connection
USB: USB playback
AUX: Line-in Function
DC IN: micro USB input to charge the built-in battery
Operation
Slide ON/OFF switch to power on WIFI speaker. After a few seconds you will hear a WIFI prompt tone. Now you
can set up the connection.
If your WIFI speaker has already been connected to you router before, it will appear on the device list.
Connection setup
If you want to set up a new WIFI speaker to your network, press "Add Device" on
the start page or press the cross icon on the top right corner of the device list and
turn to the WIFI setup interface. Press the WPS key on the WIFI speaker until you
hear a voice prompt "WIFI searching". Press "Next" on the APP and enter router
password. Wait for a few minutes and your WIFI Speaker will be added to the same
network.
GB