Evolite M3000 Mode D'emploi page 15

 Set up
Press "UP" or "DOWN" to choose functions in the same menu.
Press "Mode" button to enter next menu.
Press "ESC" button to return previous menu.
When you turn on the laser for the first time, it will take some seconds to auto load the built-in show.
NO. Name
1 Laser aperture
2 DB25 IN&OUT
3 LCD setting panel
Function knob
4
5 DMX in & out
Interlock
6
7 Key switch
8 Power in & out
This backlighted LCD display indicates the fixture is DMX addressed, the fixture status, set up values ..etc
M3000 User Manual Ver. 1.00
Laser output, do not look directly into this aperture
DB25 interface in and out for ILDA mode
LCD display with function setting buttons
For X Y size;
3 pin XLR interface for DMX
Laser output is available only when the interlock is connected.
It could be used to connect a laser emergency switch.
Key switch for laser output
AC90~240V power input and output sockets. With output feature you can
connect the device to one another using the input and output sockets. They
must be the same fixtures. DO NOT mix fixtures.
Function
Page 15