Frequently Asked Questions - Miele Swing H1 Mode D'emploi

en-US

Frequently Asked Questions

With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
Problem
The vacuum cleaner
turns off automatically.
20
Possible cause and solution
A temperature limiter switches the vacuum cleaner off
automatically when it gets too hot.
This can occur if, for instance, large objects block the
suction wand or when the filter bag is full or is
clogged with particles of fine dust. A heavily soiled
motor protection or exhaust filter can also be the
cause for overheating.
 Then switch off the vacuum cleaner and unplug it
from the socket.
After removing the cause of the fault, wait for approxi-
mately 20–30 minutes to allow the vacuum cleaner to
cool down. It can then be turned on again.