Operation - Unold TURMVENTILATOR VIEW Notice D'utilisation

4 Mode
For selecting the desired mode. Standard mode, Near-Natural Mode or
Sleep Mode.
5 Oscillation
For switching the Swing Function/Oscillation On and Off

OPERATION

1. Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
2. Plug the power cord into an electrical outlet.
3. Press the „ON/OFF" button once. The appliance starts. In the basic setting
the appliance runs at medium speed in normal mode.
Setting the speed
4. Press the „Speed" button until the appliance is working at the desired
speed. The setting is shown by the respective indicator light:
Low speed
Medium speed
High speed
Setting the mode
Press the „Mode" button and select the desired operating mode. You can
select Standard mode, Near Natural mode, and Sleep mode. Press the
„Mode" button repeatedly until the desired setting is shown through the
appropriate indicator light.
Normal mode:
Near Natural mode: Nat.
The appliance works with alternating speeds that feel like the natural
movement of air.
Sleep mode :
The appliance works in Near Natural mode with permanently set speeds that
decrease incrementally.
Copyright UNOLD AG | www.unold.de
Low
Mid.
Hi.
Nor.
Sleep
19