Publicité
When the Display Position is Selected and
Adjusted:
• Press the cursor button (ª), then select the
horizontal/vertical direction with the cursor
buttons (
,
), set the adjustment value with
0
1
the (• , ª ) cursor buttons, and press the
ENTER button.
7
SETUP LEVEL (0 IRE, 7.5 IRE)
• This corrects floating black.
H. POSITION (–7 to +7) (Factory default: 0)
• A 15-step portion of position adjustment is
permitted left and right.
V. POSITION (–3 to +7) (Factory default: 0)
• A 11-step portion of position adjustment is
permitted up and down.
To exit the picture adjust mode
Press the PIC.ADJ button.
REFERENCE:
• In the display of gamma correction, the horizontal axis indicates the
brightness level of the image that is recorded on the disc, and the
vertical axis indicates the brightness level of the image when it is
output from this unit.
• When bright points of the disc side are adjusted to the "dark" of the
output side, the fine parts of the bright portion that normally become
hard to see, become an easily discerned image.
• When dark points of the disc side are adjusted to the "bright" of the
output side, the fine parts of the dark portion that normally become
hard to see, become an easily discerned image.
PICTURE MODE
STD(STANDARD)
M1(MEMORY1)
1(ADJUSTMENT 1)
M2(MEMORY2)
M3(MEMORY3)
2(ADJUSTMENT 2)
M4(MEMORY4)
M5(MEMORY5)
3(ADJUSTMENT 3)
GAMMA
SET(PIC SETUP)
Only effective for progressive scan.
When DVI signals are output, the SHARPNESS (MID/HI), CHROMA DELAY and Gamma
correction settings will have no effect.
P I CTURE MODE
S TD
M1
M2
M3
M4
M5
SET
Remote control unit
ENTER
P I C S ET UP
Remote control unit
SE TUP LE VE L
0
3
7
MEMORY 1
GO : 0 2 4
235
0
0
100
MEMORY 1
GO : 0 2 4
CONTRAST
235
BRIGHTNESS
SHARPNESS(MID)
SHARPNESS(HI)
HUE
ENHANCER
BLACK LEVEL
0
0
100
WHITE LEVEL
CHROMA LEVEL
CHROMA DELAY
3DNR
BLNR
MEMORY 1
MQNR
CCS
GO : 0 2 4
235
G0~G9
SETUP LEVEL
H.POSITION
V.POSITION
0
0
100
12
USING THE ON-SCREEN DISPLAY
2
Use this function to display and change information on the
disc (titles, chapters, time, etc.)
In the play mode, press the DISPLAY button.
• The On-Screen Display appears.
• The picture on the TV screen switches each time the button is
pressed.
• The items displayed differ from disc to disc.
Example: For DVD audio discs
Example: For DVD video discs
• Normal playback screen
• Normal playback screen
• Disc information screen
• Disc information screen
1
GROUP
01/02
TRACK
01 /10
TITLE
GROUP ELAPSED
0 : 00 : 01
TITLE ELAPSED
GROUP REMAIN
0 : 57 : 59
TITLE REMAIN
TRACK ELAPSED
0 : 00 : 01
CHAPTER ELAPSED
TRACK REMAIN
0 : 05 : 59
CHAPTER REMAIN
• Disc information screen
• Disc information screen
AUDIO 1/1 : LPCM
2 ch/ 96 kHz/24BIT
AUDIO 1/2 : DOLBY D3/2.1 ENGLISH
SUBTITLE
Use the • and ª cursor buttons to select the item you wish to
change.
• The selected item is displayed with a yellow frame.
q For DVD audio discs
2
The elapsed time of groups and tracks can be selected.
w For DVD video discs
The elapsed time of titles, titles and chapters can be selected.
e For video CDs, Super audio CDs and music CDs
The elapsed time of tracks, tracks can be selected.
q Changing the elapsed time
Input using the number buttons, then press the ENTER
button.
Example: For 1 minute 26 seconds / "00126"
w Changing the title, track or chapter
• For DVDs
3
Input using the number buttons, then press the ENTER
button.
(For some discs it is not possible to change the title or
chapter.)
• For video CDs, Super audio CDs and music CDs
Input using the number buttons. Playback starts from
that track.
OPEN /
POWER
NTSC / PAL
CLOSE
ON
OFF
PROG / DIR
1
2
3
CLEAR
4
5
6
3
SRS.TS
7
8
9
CALL
RETURN
0
+10
1
TOP MENU
DISPLAY
2
T. MENU
DISP.
ENTER
3
2
PLAY
MENU
STILL /
STOP
PAUSE
SKIP
SLOW / SEARCH
DISPLAY
Remote control unit
Example: For video CDs, Super
audio CDs and music CDs
• Normal playback screen
• Disc information screen
TRACK
05/ 10
01/10
CHAPTER 01 /10
SINGLE ELAPSED
02 : 11
00 : 00 : 01
TITLE
SPECTRAL CANTICLE
01 : 10 : 59
SINGLE REMAIN
03 : 17
00 : 00 : 01
TOTAL ELAPSED
26 : 15
00 : 40 : 59
TOTAL REMAIN
32 : 05
Some Super audio CDs contain text
data. In this case, the album title and
artist are displayed in the stop mode,
OFF
and the title of the currently playing
track is displayed in the play mode.
Remote control unit
1
2
3
4
5
6
ENTER
7
8
9
0
Remote control unit
Remote control unit
ENGLISH
29
Publicité
Chapitres
