Perel CFANAM4 Mode D'emploi page 5

Maximum fan flow rate
Power input
Service value
Standby power consumption
Fan sound power level
Maximum air velocity
Measurement standard for service value
Contact
5. Operation
1. Install the fan on a dry, level and non-slippery surface.
2. Connect the fan to the mains.
3. Rotate the speed to the desired setting.
(0 = off, 1 = low, 2 = medium, 3 = high)
4. Adjust the fan to the desired angle.
5. Switch off the fan and disconnect from the mains after use.
6. Wall-Mounting
1. Locate and mark the position on the wall where the fan will be mounted.
2. Measure and drill the mounting holes according to the base of the fan.
3. Insert an appropriate nylon plug and screw into each hole (plugs and screws not
included). Leave approximately 1.5 cm of the screw exposed.
4. Hang the fan on the wall.
V. 01 – 16/08/2018
CFANAM4/CFANAM5/CFANAM6
Information requirements
Information to identify the model to which the information relates:
Description
Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium
Symbol
F
P
SV
PSB
LWA
C
IEC 60879:1996+ (corr. 1992)
5
Value Unit
64.3 m³/min
55.8 W
1.15 (m³/min)/W
0 W
65 dB(A)
2.7 m/sec
©Velleman nv