Perel CFANAM3 Mode D'emploi page 5

5. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
6. Operation
1. Install the fan on a dry, level and non-slippery surface.
2. Connect the fan to the mains.
3. Press the speed/on-off switch to switch on the fan.
4. Switch off the fan and disconnect from the mains after use.
7. Cleaning and Maintenance
Before starting any cleaning activities:
1. Switch off the device.
2. Unplug the device's power cord from the outlet.
Cleaning
1. Switch off the appliance.
2. Unplug the appliance from the mains.
3. Clean the inlet and outlet ribs with a vacuum cleaner.
Do not disassemble the appliance.
Do not immerse the appliance in water or any other liquid. Do not clean the appliance
with water and never allow water to enter the motor and housing.
Do not use harsh chemicals, cleaning solvents or strong detergents.
Storing
Store the device in its original package in a dry and clean place.
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulting from (incorrect) use of
this device. For more info concerning this product and the latest version of this
manual, please visit our website www.perel.eu. The information in this manual
is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright
holder.
V. 02 – 27/02/2019
front grill
blade
speed/on-off switch
CFANAM3
4
5
6
5
rear grill
handle
base
©Velleman nv