Power Boost; Power Management - FORS TIFS 644 FB Instructions De Montage Et D'utilisation

Modules (power management)
Operation

4.22 Power boost

The power boost setting makes additional power available
for induction cooking zones. A large quantity of water can
be brought to the boil very quickly.
1. Switch on the hob.
2. Press the power key
blink for approx. 5 seconds.
3. Then press the respective sensor fi eld
allocate it to a specifi c cooking zone.
The power setting display shows
will now be activated.
4. After 10 minutes the power boost setting will switch off
automatically. The
switch down to 9.
Please note:
Press the respective sensor fi eld
switch off the power boost setting.

4.23 Power management

For technical reasons two cooking zones always comprise
a module and have a maximum power level.
If this power range is exceeded when a higher power
setting level or the power boost function is switched on the
power management system will reduce the power setting
of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after
which the highest-possible power setting will be consis-
tently displayed.
once. The symbol
, the power boost
will go off and the power level will
to prematurely
GB
will
to
35