Domo DO322W Mode D'emploi page 40

DO322W
Guidelines For Heating Up And Keeping Hot
The device is also suitable for heating up liquids and keeping them hot such as heating
glühwein or preparing a punch
Note: when filling the device. The liquid level may only reach a maximum of 4 cm
under the lowest edge of the pot so that liquids do not overflow.
1. Fill the pot with the desired liquid.
2. Put the lid on the post and select the desired temperature.
3. Turn the device on with the time switch. (Set the clock to Cont. by turning
counter-clockwise.) The liquid will be kept warm consistent with the thermostat
settings.
4. The signal tone switch will sound as soon as the desired temperature is reached.
5. Stir the liquid regularly to equally distribute the heat.
6. When you hear the electronic signal, the desired temperature has been reached.
The signal tone may now be switched off.
7. Liquids with no solids can be accessed via the tap. Put a cup under the tap and
press the lever. As soon as enough liquid is in the cup, release the tap. If you want
to access larger amounts of liquid, pull the tap up until it stays by itself. You do
not have to hold the tap lever.
8. Do not tap liquids with solids in them such as soup or that type of food. The
solids will clog the tap.
9. Important!
The liquid will heat up evenly if you stir it. This also ensures that soup of mashed
potato does not burn to the bottom of the pot.
Cleaning The Tap
• The tap can be taken apart for thorough cleaning
• Unscrew the tap lever
• Clean in slightly soapy water
• Rinse with clear water
• If necessary, remove stubborn dirt with a round brush
• Reinstall the tap
• Rinse again with clear water
Cleaning And Maintenance
Always first pull the plug before cleaning.
It is best to clean the bottom of the pot with a soft brush or moist cloth. Never use
sharp of hard objects. This may cause scratches in the enamelled walls. When the
device has completely cooled, wipe it clean with a moist cloth. Then dry with a dry
cloth.
40