Pairing The Second Bike; Setting The Time - Mavic WINTECH E-BOLT Mode D'emploi

10. PAIRING THE SECOND BIKE

Your Wintech computer can be paired with two speed sensors
simultaneously, thus enabling you to use the same computer
on a second bike or with a pair of training wheels. Similarly,
your Wintech computer can recognize a sensor that is
specially designed for the Home-Trainer.
Once the extra sensors have been paired, your computer
will know which sensor is sending messages to it and
will automatically adjust to the parameters of the bike
used without any intervention on your part. To use this
characteristic, you must have the second bike kit, ref. 995 239
01, or the Home-Trainer kit, ref. 995 240 01, which are sold
separately.
R 4 sec. L
10.1 Use the right button to select screen 1 (DST).
Hold down the right button for more than 4 seconds.
The bike number (BK 1) flickers. Use the left button to select
the number of the bike chosen: BK 2 for a second bike, BK H
for the home-trainer sensor (see the user guide for the Home-
Trainer kit for further explanations on its use).
Briefly press the right button to validate.
R
14
wintech-esbolt bis.indb 14 wintech-esbolt bis.indb 14
10.1
R
10.2
10.2 The speed (0.0) and pedaling cadence (0) flicker. Turn the
front wheel until the speed is displayed (if you are using the
pedaling cadence option, turn the cranks also). When both
speed and cadence are displayed, press the right button to
validate.
The sensor pairing is now complete.

11. SETTING THE TIME

Use the right button to select screen 2 (CLK).
Hold down the right button for more than 4 seconds.
The tens of hours digit flickers.
Use the left button to set the tens of hours. Validate with the
right button. The next digit flickers. Use the left button to set
the hours and validate with the right button.
Set the minutes in the same way.
11
R
4 sec.
L
R L R
R R
20/03/07 12:34:19 20/03/07 12:34:19
12
12
Ho
nu
bik
(1,
val
rig
12
od
bik
the
to
flic
the
mo
ne
rig
yo
od
the
val
13
13
ch
Fo
me
fol
- M
a
p
th
- D
w