Christopeit Sport CT 4 Notice De Montage Et D'utilisation page 23

Step 8:
Attach the saddle (102) and saddle slide (101) at saddle support
(100) and the saddle support (100) at main frame (1).
1. Push the saddle (102) with saddle bracket into the saddle slide
(101) and tight it up in desired position.
2. Place the saddle slide (101) into the holder of saddle support
(100), set it at the desired horizontally position and screw it onto
the saddle support (100) by fixing piece (104), washer (105) and
star grip nut (106).
3. Push the saddle support wrapping (108) onto the saddle support
(100). Push the saddle support tube (100) into the matching
locator in the main frame (1), set it at the desired position and
lock it by inserting the star grip screw (107) in place and doing
it up tight.
(Note: To screw in the star grip screw (107), the threaded hole
in the main frame (1) and one of the holes in the saddle support
(100) must be aligned. Furthermore, ensure that the saddle
support (100) is not pulled out of the main frame beyond the
marked maximum Position. The setting of the saddle post can
be adjusted as desired later.) Attention: Ensure before every
exercising that the saddle is tighten firmly.
Step 9:
Checks
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the ma-
chine at a low resistance setting and make your individual
adjustments.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
23