Télécharger Imprimer la page

Bort BCT-140 Mode D'emploi page 6

Publicité

BEFORE USE
• Always check that the supply voltage is the same as
the voltage indicated on the nameplate of the tool
(tools with a rating of 230V or 240V can also be con-
GB
nected to a 220V supply)
• Do not work with materials containing asbestos
• Clamp the workpiece in case it does not remain sta-
tionary from its own weight
• Use completely unrolled and safe extension cords
with a capacity of 16 Amps (UK 13 Amps)
• Wear protective glasses and gloves, hearing protec-
tion, a dust mask, and sturdy shoes; when neces-
sary, also wear an apron
• Wear a dust protection mask when working with
materials which produce dust that is detrimental to
health; inform yourself beforehand about the materi-
als to be worked on
• Ensure that the collet size corresponds with the
shaft size of the accessory
• Be sure tool is switched off when plugging in
DURING USE
• Always keep the cord away from moving parts of the
tool; direct the cord to the rear, away from the tool
• Never use tool when cord is damaged; have it re-
placed by a qualifi ed person
• Never use spindle lock while tool is running (dam-
age due to improper handling will be excluded from
the guarantee)
• Keep hands away from rotating accessories
• When grinding metal, sparks are generated; keep
other persons and combustible material from work
area
• Keep ventilation slots uncovered
• In case of electrical or mechanical malfunction,
immediately switch off the tool and disconnect the
plug
AFTER USE
• The accessory continues to rotate for a short time
after the tool has been switched off
• Before you put down the tool, switch off the motor
and ensure that all moving parts have come to a
complete standstill
• After switching off the tool, never stop the rotation of
the accessory by a force applied against it
• Store tool in locations where temperature will not
exceed 50°C
6
WHEN CONNECTING NEW 3-PIN PLUG
(U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live)
wire in the cord of this tool to the earth terminal of
the plug
• If for any reason the old plug is cut off the cord of
this tool, it must be disposed of safely and not left
unattended
Your machine is double insulated in accord-
ance with EN 50144; therefore no earthwire
is required.
MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the motor.
Regularly clean the machine housing with a soft cloth,
preferably after each use. Keep the ventilation slots
free from dust and dirt.If the dirt does not come off use
a soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please
contact your local SBM Group dealer.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these
materials to the appropriate recycling locations. Take
your unwanted machines to your local SBM Group
dealer. Here they will be disposed of in an environmen-
tally safe way.

Publicité

loading

Ce manuel est également adapté pour:

98295658