Simpson MS60753 Manuel D'utilisation page 10

NOTE: Photographs and line drawings used in this manual are for reference
only and do not represent a specific model.
Compare the illustrations with your unit to familiarize yourself with the location of
various controls and adjustments. Save this manual for future reference.
1
B
BASIC ELEMENTS OF A pRESSURE WASHER (FIG. 1)
A. high Pressure Pump: Increases the pressure of the water supply.
B. Engine: Drives the high pressure pump. Refer to the Engine Owner's Manual
for location and operation of engine controls.
C. high Pressure hose: Carries the pressurized water from the pump to the gun
and spray wand.
D. Spray Gun: Connects with spray wand to control water flow rate, direction and
pressure.
E. Spray Wand: See how To Use Spray Wand instructions in Operation section.
f. Detergent Siphon hose (not shown): Feeds cleaning agents into the pump to mix
with the water. See how To Apply Chemicals/Cleaning Solvents instructions
in Operation section.
G. handle
h. frame
I. Pump Outlet
J. Pump Inlet
GET TO kNOW THE pRESSURE WASHER
C
G
k
10- ENG
D
E
A
h
J
I