SEVERIN KGK 8913 Mode D'emploi page 26

a) Loosen the 3 screws that hold the middle
hinge and then remove it.
b) Raise the freezer door about 50 mm, so
you can remove it from the fridge.
c) Remove the adjustable front stands below
the lower hinge. Then, loosen the 4 screws
that hold the lower hinge and remove it
from the fridge.
Step 2 The removal of the doors is now finished.
a) Install the removed parts on the opposite
side of the appliance. Pull the door socket,
as shown in the following figure, and install
it in the respective position on the other side.
b) Remove the screws from the stopper, as
shown in the following figure, and install it
on the opposite side of the door.
c) Remove the shaft and the two stoppers
from the lower hinge and install it in the
position, as shown in the following figure.
- 26 -
Step 3