SEVERIN KGK 8970 Mode D'emploi page 28

4. Loosen the screws supporting the middle
door hinge and then remove the middle
door hinge. Lift the freezer door about 50
mm to finally remove it from the unit.
5. Remove the plastic cover on one side of
the device and place it on the other side.
6. Tilt the device backwards slightly and
remove the screws supporting the lower
door hinge. Unscrew the adjustable stand
and the adjacent screw from the unit and
screw them on the other side.
7. Loosen the screw on the door hinge and
tighten it on the other side of the hinge.
8. Unscrew the plastic plug on the bottom of
the freezer door and replace it on the
other side of the door.
9. Loosen the cover and plug on the top of
the freezer door and attach it to the other
side.
10. Attach the freezer door, rotate the middle
door hinge 180 ° and then attach it on
the opposite side of the unit. Attach the
middle door hinge with the corresponding
screws.
11. Loosen the plastic plug on the bottom of
the refrigerator door and replace the
separately enclosed plug on the other
side of the door.
- 28 -