Beper 50.943 Manuel D'instructions page 12

Dry Iron Use instructions
STORAGE
Unplug the appliance from the socket and let it cool.
QUESTIONS
Problems
The iron does not work
The light indicator does not
light
The fabric stick bewteen each
other
TECHNICAL DATA
Power: 1000W
Power supply: 220-240V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), re-
quires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the reco-
very and recycling of the materials they contain, and reduce the impact on human health and the
environment.
The crossed out "wheeled bin" symbol
that when you dispose of the appliance, it must be separately collected.
Causes
1. the temperature indicator is
too low
2. problems with power supply
1. the iron is cooling
2. the iron does not heat
1. the temperature is to high
on the product reminds you of your obligation,
12
Solution
1. select higher temperature
position
2. check the power supply by
plugging another appliance to
the socket
1. wait until cooling is over
2. see paragraph above
1. select lower temperature
position and let the iron getting
cooler