Hama Supreme 20HD Mode D'emploi page 4

Warning
• Never connect the power pack's charging cable to its input and output simultaneously. This can
damage the battery.
• Do not connect any devices during the power pack charging process. Doing so can damage the
power pack and connected devices.
• Connect the enclosed USB-A to USB-C cable to the power pack's USB port (OUT 5V/3A) and the
USB-C port on your device (mobile phone, smartphone, etc.).
• In certain circumstances, the enclosed charging / connecting cable may not match the USB port on
your device. In this case, use the USB cable that came with your device.
• When using the USB-C output (OUT 5V/3A) for the charging process, connect a suitable USB-C
charging cable to the USB-C output on the power pack and the port on your device.
• The charging process begins automatically. During the charging process, the status LEDs indicate
the power pack's remaining available capacity.
• The current battery charge status of your device is indicated on this.
• Terminate the charging process and switch the power pack off by pressing the button on the
power pack twice. The status LEDs go out.
• In the event that no device is connected, the power pack switches itself off automatically.
Note - optimised charging
Optimised charging means that the power pack recognises the connected device, supplies it with
the ideal current strength and therefore reduces the charging time to a minimum. Note that the
power pack's maximum current delivery is 3000 mA.
5. Care and maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning
agents.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from
improper installation/mounting, improper use of the product or from failure to observe the operating
instructions and/or safety notes.
4