Listening To A Connected Device - Teac MC-D800 Mode D'emploi

You can connect the audio output jack or headphones
jack of a portable audio player or other device to this
unit and listen to its audio playback through this unit .
1
Use a commercially-available audio
cable to connect the headphones jack
(or audio output jack) of a portable
audio player or other device to the ana-
log audio input jacks (AUX IN) on the
back of the unit.
2 Press the PHONO/AUX button to select
"AUX".
Z
56

Listening to a connected device

3 Start playback on the playback device.
Then, adjust the volume of both this
unit and the connected device.
o If the volume is not raised on an audio player
when its headphones jack is connected to this
unit, no sound will be output from this unit .
o If you raise the volume level of the connected
device too high, the sound might distort . If this
occurs, lower the volume of the connected
device until distortion stops and then adjust the
volume on this unit .