Teac MC-D800 Mode D'emploi page 53

The "hour" value blinks .
o If no action is taken for 20 seconds, timer setting
will end automatically .
3 Press the TIME (j/k) buttons to set
the TIMER ON hour and press the TIMER
button.
Display example
o After setting the hour, the minutes blink .
4 Press the TIME (j/k) buttons to set
the TIMER ON minute and press the
TIMER button.
Display example
After making the TIMER ON setting, "OFF TIME"
appears and the hour value blinks .
c
5
Repeat steps and
3
OFF time.
Display example
to set the TIMER
4
53