Teac MC-D800 Mode D'emploi page 3

Masquer les pouces Voir aussi pour MC-D800:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

This product contains a semiconductor laser system inside the cabi-
net and is classified as a "CLASS 1 LASER PRODUCT".
To prevent being exposed to the laser beam, do not try to open the
enclosure.
Laser:
Type:
EP-C101
Manufacturer:
GUANGDONG EVER BRIGHT GROUP CO.,LTD.
Laser output:
Less than 0.5 mW
Wavelength:
790±25 nm
Model for USA
This product has been designed and manufactured according to
FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the
Radiation Control for Health and Safety Act of 1968", and is classi-
fied as class ! laser product. There is not hazardous invisible laser
radiation during operation because invisible laser radiation emit-
ted inside of this product is completely confined in the protective
housings.
The label required in this regulation is as follows:
Q Precautions concerning batteries
Misuse of batteries could cause them to rupture or leak leading
to fire, injury or the staining of nearby things. Please read and
observe the following precautions carefully.
o Be sure to insert the batteries with correct positive (¥) and
negative (^) orientations.
o Use batteries of the same type. Never use different types of
batteries together.
o If the remote control is not used for a long time (more than a
month), remove the batteries to prevent them from leaking.
o If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
o Do not use batteries of types other than those specified. Do
not mix new batteries with old ones or use different types of
batteries together.
o Do not heat or disassemble batteries. Never throw batteries
into fire or water.
o Do not carry or store batteries with other metallic objects.
The batteries could short circuit, leak or explode.
o Never recharge a battery unless it is confirmed to be a
rechargeable type.
3

Publicité

Chapitres

Table des Matières
loading

Table des Matières