Publicité
Les langues disponibles
Les langues disponibles
5. Appliance description
Shiatsu massage pillow (front)
1
3
4
4
5
6
7
Hand switch
10
6. Start-up
CAUTION
• IMPORTANT: Deactivate the transport lock on the massagemechanism before starting-up
for the first time. Remove the screw on the reverse side of the seat cover using the tool sup-
plied. The Shiatsu seat cover will be irreparably damaged and unusable if the transport lock
screw is not removed and the Shiatsu seat cover is operated immediately. No guarantee is
accepted in this case.
• Insert the transport lock screw each time the device is transported again. The device may be irre-
parably damaged if it is transported without the transport lock.
• Fasten the protective cover to the surface of the Shiatsu seat cover with the Velcro straps. It is also
possible to massage without the protective cover; this is generally found to be "harder".
• Position the seat cover upright on a suitable seating arrangement with seating surface and backrest
(chair, sofa, or similar). Ensure that the seat cover is supported over its entire area and has a suf-
ficiently high backrest.
• Use the flexible fastening straps and Velcro strips to secure the Shiatsu seat cover.
• Connect the power supply unit and the seat cover with the plug connector.
• Connect the device to the mains by plugging the plug into the socket.
8
1
2
3
4
5
6
7
8
9
1 Protective cover
2
2 Neck pillow
3 Four massage heads
4
4 Fastening straps
5 Connecting coupling
6 Power supply unit with plug connector and
4
power cable
7 Hand switch
8 Storage bag
1 Button
2 FULL BACK button (entire back massage)
3 UPPER BACK button (upper back massage)
4 LOWER BACK button (lower back massage)
5 HEAT button (heat)
6 SPOT buttons (localised massage)
7 SPEED button (massage intensity)
8 SHIATSU button (Shiatsu massage)
9 ROLLING button (rolling massage)
10 DEMO button
12
Publicité
