Pioneer PDP-5004 Mode D'emploi page 33

2 PinP
The subscreen is displayed in one of the four corners
of the main screen.
INPUT1
3 PoutP
The subscreen is displayed outside the right side of
the main screen.
INPUT1
2
Press the remote control unit's SUB INPUT button
to select the subscreen input source.
To exchange the main screen and subscreen
inputs
Press the remote control unit's SWAP button.
¶ When 2-SCREEN mode has been selected:
The right and left sides of the display will switch; what
was previously the main screen will now show the
subscreen, and vice versa.
¶ When PinP or PoutP has been selected:
What was previously the main screen image will now
appear in reduced size as the subscreen image, and
vice versa.
To change the position of the subscreen in PinP
mode:
Press the remote control unit's PIP SHIFT.
Each time the button is pressed, the position of the
subscreen moves in the following order:
3 Lower right
Lower left 2
INPUT2
INPUT2
3 Upper right
Upper left 2
To display the currently selected input
Press the DISPLAY button.
If the DISPLAY button is pressed while in multiscreen
mode, the main screen and sub-screen will each be
displayed with its currently selected input.
Notes
¶ When using the plasma display in a profit-making activity, or
when exhibiting images publicly, using the screen size function
to compress or stretch the image may result in infringement of
the copyrights of the image owners.
¶ If the multiscreen display is left on for an extended period of
time, or if the same multiscreen display is repeatedly shown
for short periods on an everyday basis, a residual image
pattern may be burned onto the screen.
¶ When selecting the 2-SCREEN mode, the screen image may
appear somewhat rougher, depending on the source used.
¶ The multiscreen mode will be canceled if a menu is opened.
¶ The screen size cannot be changed during multiscreen display.
¶ The sound of the input selected in the main screen is output
when using the multiscreen function.
¶ Since the main screen uses circuitry providing higher picture
quality than the circuitry for the subscreen, main screen and
subscreen picture quality differs.
¶ When performing picture quality adjustment, there are some
items that do not affect subscreen picture quality.
Operation
29
EN