Pontec PondoStar LED Set 6 Notice D'emploi page 9

Scope of delivery
Delivery
 A Quantity
1 6
2 1
Installation and connection
 B, C
Ensure that units are positioned and secured such that they cannot present a hazard:
• Install the transformer at a minimum safety distance of 2 m from the water.
• Position the lights outside of the water or in the water and tilt the light head as desired.
How to proceed:
1. Connect the plug of the spotlight connection cable to the socket on the transformer and hand-tighten the union nut.
Commissioning/start-up
W A R N I N G
Possible death or severe injury from hazardous electrical voltage!
• Prior to reaching into the water, isolate (switch off and disconnect) all units/devices used in the water.
• Isolate the device (disconnect from the power supply) before carrying out any work on it.
N O T E
Sensitive electrical components. Incorrect connection will destroy the unit.
• Do not connect the unit to a dimmable power supply.
Switching on: Insert the power plug of the transformer into the socket.
• Check the function of the spotlights.
Switching off: Disconnect the transformer power plug.
Remedy of faults
S
Malfunction
Lamp does not light up.
Luminosity decreasing
Description
LED spot including bulb
Transformer
Cause
Power supply interrupted
Transformer defective
Lamp glass soiled
Remedy
Check power supply
Replace transformer
Clean
- EN -
9