EdilKamin DAISY Installation, Usage Et Maintenance page 48

REMOTE CONTROL
This controls all the functions.
In addition to the above-described icons, the display also gives
other useful information.
- Stand-by position: shows the output temperature (TM), the
set temperature (SET), the Kg of pellets (15Kg) remaining in the
hopper and the current time.
- During the ignition phase: START-UP as well as the informa-
tion shown in stand-by mode
- When operating: shows the output temperature (TM), the set
temperature (SET), the Kg of pellets (15Kg) still in the hopper
and the current time.
DO NOT PRESS THE BUTTON MORE THAN ONCE
.
Note: If the radio control is not used for a few seconds, the
display will go dark as it has moved into the power-saving fun-
ction. The display can be reactivated by pressing any button.
VENTILATION ADJUSTMENT:
By pressing key A, the display will show the AIR setting, one of
three different ventilation modes can be selected:
OFF: ventilation is off even when the stove is operating
AUTO: ventilation is activated automatically according to a pro-
gramme for the issue of power designed by the manufacturer
MANUAL: Ventilation functions only when the stove is opera-
ting; there are 5 xed ventilation levels to choose from, starting
from the minimum (silent) F1 up to the maximum F5.
INSTRUCTIONS FOR USE
- 48
- icon ashing: remote control searching for network
- icon xed: remote control with connection enabled
keypad locked (press "A" and "M" in parallel for a few seconds
to lock or unlock the keypad)
at battery (3 mini alkaline batteries type AAA)
programming enabled
alphanumeric display consisting of 16 gures arranged in two
lines of 8 gures
- icon ashing: boiler-stove turning on
- icon xed: boiler-stove working
automatic function (display shows temperature)
Key to buttons and display:
: to turn off and on (to go from "remote control on stand-
by" to "remote control on")
+/- : to increase/decrease the various regulations
A : AIR key: to adjust the functioning of the fan in OFF-
AUTO or manual mode F1, F2, F3, F4, F5
M : MENU' key: press quickly to set the "Comfort Clima"
mode or the power mode. Press for 2 seconds to access to the
various programming menus
-