CARE & MAINTENANCE
MAINTENANCE -
LONG PERIODS OF NON USE
If the air conditioner will not be used for a long
period of time, complete the following:
1. Turn on the FAN function until the appliance is
completely dry.
2. Turn off the appliance and disconnect the power.
3. Clean and replace all fi lters.
4. Remove the batteries from the remote control.
MAINTENANCE -
PRE-SEASON INSPECTION
After a long period of non-use or before a period of
frequent use, complete the following:
1. Check for damaged wires.
2. Clean all fi lters.
3. Check for leaks.
4. Replace the remote control batteries.
5. Ensure nothing is blocking air inlets and outlets.
Ensure nothing is in the way of the infrared
remote receiver.
MAINTENANCE AND CLEANING OF THE
OUTDOOR APPLIANCE
Any cleaning, maintenance or repairs of the
outdoor appliance must be completed by a licensed
HVAC technician. Contact the dealer who sold the
appliance for information on maintenance or repairs
to the outdoor appliance.
DISPOSAL
Check for local regulatory compliance regarding the
approved and safe disposal of this appliance.
ERROR CODES
If an error code appears in the display window, the
appliance may stop operation as a safety feature.
Wait approximately 10 minutes as the error may
resolve itself. If the error code persists, disconnect
the power to the appliance, wait approximately 5
minutes and then restore power to the appliance.
If the error persists after the power cycle, contact the
sales center where the appliance was purchased for
information on servicing the appliance.
10