Acknowledgement of the acoustic alarm:
Acknowledge an alarm: push
Example:
To acknowledge a door alarm: A1 flashes at the display. Push
Troubleshooting
Noise:
If abnormal noise occurs, request service assistance.
Operating sounds from compressor, condenser fan and interior fan are normal.
Some models are equipped with a drain pump.
If sheet metal parts, front panels or panels in front of the compressor compartment
are making noise, these might be open. Close the panels. The front panel is
equipped with a catch, fitting into a locking system. The locking system could be
locked unintentionally, then the catch can be extracted with a tool.
Frosting inside compartment:
Ambient humidity too high.
The door is opened too often.
The door is left open for too long.
Damaged door gasket.
Poor cooling performance:
Ambient temperature too high (above +43 °C).
The door is opened too often and/or open for too long.
The door is left open.
Damaged door gasket.
Cabinet temperature setting too high.
Cabinet too packed with foods - air inlet/outlet blocked.
Condenser mesh filter is clogged.
Warm or hot foods inside.
Defrost in progress. The cabinet temperature may rise temporarily during the defrost
cycle, but it will not affect the foods inside.
765041469
P
.
Rev. 000
P
.
41