Samsung HT-H5500 Mode D'emploi page 21

6. Repeat Steps 4 and 5 until you have filled in all
parameters.
You can get the network parameter values from
✎
your Internet provider.
When finished entering all the parameter values,
7.
select Return ( ' ), and then press the E
button. The home cinema verifies the network
connection and then connects to the network.
Wireless Network
You can set up a wireless network connection in three
ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network devices
currently connected to the product or, if applicable,
the product's current wired connection.
Wireless - Automatic
❑
Follow the Steps 1 to 3 in "Configuring Your Network
Connection". (See page 20)
In the Network Settings screen, change
1.
Network Type to Wireless. The product
searches for and then displays a list of the
available networks.
Network Settings
Select your network type.
Network Type Wireless
Wireless network
✓ ✓
si-ap
MIC
KIMING_VTOWER
WPS(PBC) Search
2. Select the desired network, and then press the
E button.
On the Security screen, enter your network's
3.
security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting
a letter with ▲▼◄► buttons, and then pressing
E button.
You can connect your BD
Home Theater to the
internet. Please select which
wireless network to use.
m Move " Select ' Return
21
- English
4. When finished, select Done, and then press the
E button. The product verifies the network
connection and then connects to the network.
You should be able to find the security code or
✎
pass phrase on one of the set up screens you
used to set up your router or modem.
Wireless - Manual
❑
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your Network
Connection". (See page 20)
1. In the Network Settings screen, change
Network Type to Wireless. The product
searches for and then displays a list of the
available networks.
2. Scroll through the list, select the desired network
or Add Network, and then press the E button.
3. If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
4. Enter your wireless network or wireless router's
name.
• Enter numbers directly using the number
buttons on your remote control.
• Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the E
button.
• To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select , and then press the E button.
• To display symbols and punctuation, select
123#&, and then press the E button. To
redisplay letters, select 123#&, and then press
the E button.
When finished, select Done, and then press the
E button.
On the Security method screen that appears,
5.
use the ▲▼ buttons to select the network's
Security method, and then press the E button.
On the next screen, enter your network's
security code or pass phrase.
• Enter numbers directly using the number
buttons on your remote control.
• Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the E
button.