Using The Special Effects Remote Control Buttons - Samsung HT-H5500 Mode D'emploi

Playing Content
NFC connection works even when the Home
✎
Cinema is turned off, if Quick start is set to On.
However, NFC connection will work only after the
Home Cinema is turned on if the power cord had
been disconnected and reconnected.
The is a trademark or
✎
registered trademark of NFC
Forum, Inc. in the United States
and in other countries.
NFC tagging for Bluetooth
✎
connection cannot be established
while powering on and off.
NFC tagging for Bluetooth
✎
connection will not work while the battery
indicator is blinking.
Using the Special Effects Remote
Control Buttons
TV SOUND
If you have a TV that supports Anynet+ (HDMI-
CEC), the button lets you direct the
TV SOUND
TV's audio to the Home Cinema Speakers or the TV
Speakers. To use, follow these steps:
1. Connect an HDMI cable to the TV and home
cinema. (See page 13)
2. Set Anynet+ (HDMI-CEC) On in the home
cinema and TV.
Press the
3. TV SOUND
control. TV SOUND ON flashes on the display
on the front panel, and then changes to D. IN.
• When TV SOUND is on, TV audio outputs
through the Home Cinema speakers.
4. Press the TV SOUND
SOUND off.
• When TV SOUND is off, TV audio outputs
through the speakers of the connected
Anynet+ TV.
Use TV SOUND:
❑
1) When you want to listen to the TV's audio
through the home cinema speakers.
2) When you want to listen to the audio from a
USB device plugged into the TV through the
home cinema speakers.
Note2
S3/S4
Note3
TV SOUND
button on the remote
button again to turn TV
36
- English
TV SOUND ON/OFF support specifications:
❑
Anynet+
(HDMI-CEC) TV Sound ON
Setting
HTS Speaker
Output
ON
TV Speaker
Mute
HTS Speaker
Output
OFF
TV Speaker
Output
HTS Speaker
Output
No Operation
TV Speaker
Output
DSP/EQ
You can enjoy various sound mode.
 DSPOFF : Select for normal listening.
 CINEMA : Reproduces realistic and powerful
sound for movie sources.
 MUSIC : Suitable for whole music sources.
 GAME : Suited for playing video games and
produces powerful sound.
 M-STEREO (Multi Stereo) : Produces
surround sound for 2 channel input sources.
 POWER BASS : Reinforce bass sound effect.
 LOUD : Improves bass sound characteristics
according to output level.
 NIGHT : Optimizes to night by compress
dynamic range (soft sound).
TV Sound OFF
HTS Speaker
Mute
TV Speaker
Output
HTS Speaker
Mute
TV Speaker
Output
HTS Speaker
Mute
TV Speaker
Output
DSP/EQ