Connecting To A Network Router - Samsung HT-H5500 Mode D'emploi

Connections

Connecting to a Network Router

You can connect your product to your network router
using one of the methods illustrated below.
Wired Network
Broadband modem
(with integrated router)
Or
Router
Your router or your Internet Service Provider's
✎
policies may prevent the product from accessing
Samsung's software update server. If this occurs,
contact your Internet Service Provider (ISP) for
more information.
DSL users, please use a router to make a network
✎
connection.
To use the DLNA function, you must connect your
✎
PC to your network as shown in the illustrations
above.
The connection can be wired or wireless.
Broadband
service
Broadband
service
Broadband
modem
14
- English
Wireless Network
If your wireless IP router supports DHCP, this
✎
product can use a DHCP or static IP address to
connect to the wireless network.
Set your wireless IP router to Infrastructure mode.
✎
Ad-hoc mode is not supported.
The product supports only the following wireless
✎
security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Select a channel on the wireless IP router that is
✎
not currently being used. If the channel set for
the wireless IP router is currently being used by
another device nearby, it will result in interference
and communication failure.
In compliance with the newest Wi-Fi certification
✎
specifications, Samsung home cinemas do not
support WEP, TKIP, or TKIP-AES (WPS2 Mixed)
security encryption in networks running in the
802.11n mode.
Wireless LAN, by its nature, may cause
✎
interference, depending on the operating
conditions (AP performance, distance, obstacles,
interference by other radio devices, etc).
Wireless IP sharer
Broadband
service