Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
SPECIFICATIONS
Model
Capacities
No load speed (RPM)
Overall length
Net weight
Rated voltage
Standard battery cartridges
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
GENERAL SAFETY RULES
WARNING:
Read all instructions. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury. The
term "power tool" in all of the warnings listed
below
refers
to
(corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
Work area safety
1.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Electrical safety
4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
Steel
Wood
21 mm (13/16")
5.1 x 38 mm
Wood screw
(3/16" x 1-1/2")
Machine screw
High
Low
1.4 kg ( 3.1 lbs)
D.C.9.6V
PA09, 9120, 9122,
9134, 9135
your
mains-operated
6260D
6270D
10 mm (3/8")
25 mm (1")
5.1 x 63 mm (3/16" x 2-1/2")
192 mm (7-9/16")
1.5 kg (3.3 lbs)
D.C.12V
PA12, 1220, 1222,
1234, 1235
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
GEA002-2
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6.
Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
7.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
Personal safety
9.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
10. Use safety equipment. Always wear eye protec-
tion. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal inju-
ries.
2
6280D
25 mm (1")
6 mm (1/4")
0 - 1,200/min.
0 - 350/min.
1.6 kg (3.5 lbs)
D.C.14.4V
PA14,1420,1422,
1434,1435
6390D
13 mm (1/2")
36 mm (1-7/16")
6 mm x 75 mm
(1/4" x 3")
220 mm (8-5/8")
2.2 kg (4.9 lbs)
D.C.18V
PA18,1822,
1834,1835
Publicité
