Elica ECN636S3 Guide D'utilisation, D'entretien Et D'installation page 7

Example B
NOTE: Top view ceiling joists
parallel to front of hood
16"
(40.6 cm)
over duct/cooktop
joist spacing
7 1 ⁄ "
1 6
(17.9cm)
Install Range Hood
Place the template in the ceiling considering the
1
instructions for ceiling support structures.
: Always consider the front of hood legend when
NOTE
playing the template on the ceiling.
It will define the control's location.
Mark with a pencil the hole locations for screws and
2
duct in the ceiling.
10 1 ⁄ " (25.5 cm)
1 6
install cross-
framing
symmetrically
Centerline
2 x 4 cross
framing
Ø 6 1 ⁄ " (15.9
4
cm) duct
Align duct to Cooktop
center of cooktop outline
Hood front
Example C
NOTE: Top view ceiling joists
parallel to front of hood
10 ⁄ " (25.5 cm)
1
1 6
install cross-framing
symmetrically over
duct/cooktop
7 1 ⁄ "
1 6
(17.9cm)
16"
(40.6 cm)
joist spacing
Hood front
Fix the upper horizontal support with 4 - 5x45 mm
3
screws.
Install the 6" (15.2 cm) round transition with 2 - 3.5x9.5 mm
4
screws.
A
B
A. 6" round Transition
B. Hood assembly
C. 2 - 3.5x9.5 mm screws
Centerline
2 x 4 cross
framing
Ø 6 ⁄ " (15.9
1
4
cm) duct
Align duct to Cooktop
center of cooktop outline
C
7