AYA AFM3502X Manuel D'utilisation page 53

6. Unscrew the left front leg(9) and transfer it to the right side;
7. Set the door in place, making sure the door seat at the left
upper hinge bin(11);
8. Before placing the bottom hinge(5), remove the bolt-pin(6)
and reverse the direction of the bottom hinge(5). Then
install the bottom hinge(5) onto the left side of
the lower frame with two screws(8);
9. Insert the bolt-pin(6) into the bottom hinge(5);
10. While holding the door in the closed position, attach the
bottom hinge(5) onto left side of the bottom frame with two
screws(8), do not tighten the two screws(8) until the top of
the door is parallel to the counter top.
Figure 1
Figure 1: Represents position of components prior to door
reversal.
Figure 2: Represents position of components after door
reversal.
14
12
13
-51-
12
Figure 2
14
13