Selecting Digital Closed Caption Parameters; Clock Setting - Pioneer PDP-5080HD Mode D'emploi

Tuner Setup
09
Note
• The Primary Caption Service is usually offered for Service 1,
and the Secondary Language Service is usually offered for
Service 2 if these services are available.

Selecting digital closed caption parameters

Use the following procedure to change such parameters of
digital closed captions as font size, font type, foreground and
background colors.
1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Closed Captions" ( /
4
Select "Digital Settings" ( /
5
Select "Font Size", "Font", or any other item ( /
ENTER).
6
Select the desired parameter ( /
Closed Captions Digital Settings
Digital Settings Font Size
7
Repeat steps 5 and 6 as necessary ( ,
8
Press HOME MENU to exit the menu.
The following table shows the parameters selectable for each
item.
Item Selection
Font Size Auto/ Large/ Standard/ Small
Auto/ Font 1/ Font 2/ Font 3/ Font 4/ Font 5/ Font 6/
1
Font
Font 7
Font Color Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/
Magenta/ Cyan
Font Opacity Auto/ Solid/ Transparent/ Translucent/Flashing
Background Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/
Color Magenta/ Cyan
Background Auto/ Solid/ Transparent/ Translucent
Opacity
1
Font 1 (monospaced with serifs)/ Font 2 (proportionally spaced with serifs)/ Font 3
(monospaced without serifs)/ Font 4 (proportionally spaced without serifs)/ Font 5
(casual font)/ Font 6 (cursive font)/ Font 7 (small capitals font)
With "Auto" selected, parameters specified by the provider are
used; if not specified by the provider, the bolded default
parameters are used. If you select parameters other than "Auto",
the selected parameters are used regardless of the provider's
specifications.

Clock Setting

With "Auto Set" selected for Clock Setting, the system acquires
and sets time information automatically. You can also manually
set the correct time. If you disconnect the power cord from the
power outlet or power blackout occurs, the set time is cleared.
44
En
then ENTER).
then ENTER).
then ENTER).
then
then ENTER).
Font Size
Large
Standard xxxxxxxxxxxxxxxxxxxxx
Small xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu
Exit
/ ).
1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Clock" ( / then ENTER).
4
Select "Time Zone" ( /
5
Select a time zone for your area ( /
Clock Time Zone
Atlantic
Time Zone
Eastern
Central
Mountain
6
Select "D.S.T." ( , / , then ENTER).
7
Select "Applies" or "Does Not Apply" ( /
• When you start "Daylight Savings Time" mode, select
"Applies" for "D.S.T." and select "Does Not Apply" when
you cancel it, otherwise the correct time will not be
displayed regardless of the "Auto/Manual Set" setting.
Clock Daylight Savings Time
D.S.T.
Applies
Does Not Apply
8
Select "Auto/Manual Set" ( ,
9
Select "Auto Set" or "Manual Set" ( /
10
If you select "Auto Set", select an antenna (A or B) and
a channel number using
Clock Auto/Manual Set Clock Set Channel
Auto/Manual Set •Auto Set Ant. A
• The date and time will be automatically corrected using
data from the selected channel.
If you select "Manual Set", manually set the date and time
using / , / and ENTER.
Clock Auto/Manual Set Date and Time
3
4
Auto/Manual Set •Manual Set 3 /17/04
5
6
11
Press HOME MENU to exit the menu.
Note
• If you setup the TV Guide On Screen™ system, the plasma
display acquires clock information through the TV Guide On
Screen™ system; in this situation you cannot set up the clock
using the menu. If you select a parameter for the Clock menu
and press ENTER, the menu screen disappears and a dialog box
appears instead; press A to clear the dialog box.
then ENTER).
then ENTER) .
then ENTER).
Current Time:
xxxxxxxxxxxxxxxxxxxxx
9:55 pm EDT
xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu Exit
then ENTER).
Current Time:
xxxxxxxxxxxxxxxxxxxxx
9:56 pm EDT
xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu
Exit
/ , then ENTER).
then ENTER).
/ and ENTER.
Current Time:
xxxxxxxxxxxxxxxxxxxxx
11:58 pm PDT
2.0 xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu Exit
Current Time:
xxxxxxxxxxxxxxxxxxxxx
11:58 pm PDT
11:58pm xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu Exit