Preparation; Installing The Plasma Display; Moving The Plasma Display; Installing The Pioneer Speaker (Pdp-5080Hd) - Pioneer PDP-5080HD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Preparation

05
Chapter 5
Preparation

Installing the plasma display

Over 50 cm
(19 11/16 inches)
Over
10 cm
(3 15/16
inches)
Location
• Avoid direct sunlight. Maintain adequate ventilation.
Note
• Allow enough space around the upper and back parts when
installing to ensure adequate ventilation of the rear of the unit.

Moving the plasma display

Because the plasma display is heavy, be sure to have someone
help you when moving it.
(PDP-5080HD)
16
En
(PDP-4280HD)
Caution
When installing on a rack, etc., hold the plasma display.
Installing the Pioneer speaker
Caution
• If you want to move the plasma display unit, make sure that you
remove the speaker first. In addition, do not move the display
holding on to the mounting fittings. This can result in injury or
damage to the unit.
About the speaker
• In order to prevent damage to the speaker system resulting
from input overload, please observe the following precautions:
• Do not use the speaker with anything other than the plasma
display. Doing so may result in damage or fire.
• Be sure to turn the connected devices off and remove the
power cord from the power outlet beforehand when changing
the connection or installation method.
• When using a tone control function to greatly emphasize treble
sounds, do not use excessive amplifier volume.
• Please handle the speaker with sufficient care, as the grille net
and the cabinet can become damaged or broken when they are
subjected to strong external impacts.
• Placing a CRT computer screen or CRT monitor near to the
speaker may result in interference or color distortion. If this
happens, distance the monitor from the speaker.
Installation
• The speaker is wide, and may become unstable when installed
by a one person alone. This may result in injury or product
damage. Therefore, at least two people must assemble and
install it.
• When installing the speaker, do not use any screws other than
those supplied, otherwise the speaker may come off from the
main unit and fall over.
• When installing the speaker, tighten the screws firmly.
(PDP-5080HD)

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

Pdp-4280hdKuro pdp-5080hdKuro pdp-4280hd

Table des Matières