SPM GT Push 2 Manuel D'utilisation page 33

To avoid electrical shock or contact with
moving parts, before proceeding with the
disassembling operations, make sure all
switches are in "OFF" position and that the
main power supply is disconnected.
- Switch off the machine and disconnect the
power cable.
- Wash and disinfect hands thoroughly before
performing cleaning operations otherwise use
clean and sanitized gloves.
- Remove the main cover.
- Wash and sanitize your hands and forearms.
- Unscrew the bowl knobs (fig.14).
- Remove the accessory to give a "star" peculiar
shape to the dispensed product (fig.15).
- Simultaneously press the two securing tabs
and lift the tap to extract it from its seat (see
fig.16).
- Disassemble the tap by keeping the body
pressed down and slipping the lever from its
seat (fig.16).
To prevent bacteria growth, remove all
o-rings when cleaning.
Failure to do so could create a health
- Pull the tank outward, as shown, to completely
remove it from its seat (fig.17).
Data di emissione: Dicembre, 2018
Caution
Caution
hazard.
Revisione: 2
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Pag. : 33/68