Cabling Examples - LD Systems MAUI 28 G2 Manuel D'utilisation

WHAT DOES LD SYSTEMS DynX DSP STAND FOR?
®
DSP stands for Digital Signal Processing, DynX comprises the Limiter, EQ, Compressor and Crossover features. The digital signal process-
®
ing ensures maximum audio performance with maximum clarity and protects the PA system from overload.
WHAT EXACTLY DOES DynX DSP DO?
®
The Limiter function protects the speakers and prevents distortions caused by overload. Separate limiters for bass
midrange and high range attenuate the signal when the level exceeds a value which could have a negative effect. Each limiter is
optimised for one of the three seamlessly contiguous frequency ranges (multi-band limiter). The system can be operated in this manner
with a higher overall sound pressure as extreme peaks are automatically lowered, so that the total volume does not need to be reduced.
The Multiband EQ works over the entire frequency range and optimises the overall sound of the system.
The crossovers divide the audio signal according to the frequency range of the respective speakers, namely the subwoofer or the mids
and tweeters of the array column. The amplitude and running-time optimisation of the crossover ensures that all frequencies are output
evenly and reach the listener at the same time.

CABLING EXAMPLES

Example of Mono operating mode.
9