Publicité
Les langues disponibles
Les langues disponibles
2
Evenly insert appliance into cut-out. Press
appliance firmly into the cut-out.
9
CAUTION
Don't kink or pinch connecting cable.
3
Only for flush mounting:
Check appliance for functionality first (see
section "Check the installation").
Fill in the gap between the worktop and the
ceramic hob using a suitable commercial silicone
bonding agent in a color of your choice. Please
observe the manufacturer's instructions for use.
Apply the silicone bonding agent in the joints.
Before the silicone bonding agent starts to form a
skin, moisten a blade or your finger with a soapy
solution and smooth it over.
Don't turn on the appliance until after the silicone
adhesive has completely dried (at least 24 hours,
depending on room temperature).
9
CAUTION
Unsuitable silicone adhesive will cause natural
stone countertops to become permanently
discolored.
11
Publicité
