D-Link DCS-942L Guide D'installation page 3

SySTEm rEQUIrEmENTS
• Computer with Microsoft Windows
• PC with 1.3GHz or above and at least 128MB RAM
• Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and
enabled
• Existing 10/100 Ethernet-based network or 802.11g/n wireless network
PrODUCT SETUP
WiNDoWs User
Step 1:
Connect the included Ethernet cable to the network cable connector located on the bottom panel of the
DCS-942L and attach it to the network.
Step 2:
Attach the external power supply to the DC power input connector located on the bottom panel of the
DCS-942L and connect it to your wall outlet or power strip. Power is confirmed when the green LED
Power Indicator located on the back panel is lit.
Step 3:
Insert the DCS-942L Driver CD in the CD-ROM drive. If the CD Autorun function does not automatically
start on your computer, go to Start > Run. In the run box type
drive letter of your CD-ROM drive) and click OK. When the autorun screen appears, click Set up your
Cloud Camera and follow the on-screen
Step 4:
Click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to
finish setting up your camera.
DCs-942l
®
8/7/Vista/XP, or Mac with OS X 10.6 or higher
instructions.
D:\setup.exe (where D: represents the
3