RCF L-PAD 6 Manuel Utilisateur page 5

FUNCTIONS
MICROPHONE INPUT (Ch. 1 - Ch. 2) Connect your microphones to these balanced XLR connector: pin1=Earth, pin2=Hot, pin3=Cold. These inputs are
provided with +48 V phantom power for condenser or electret microphones. Gain scale 0 dB/‑50 dB.
LINE INPUT (Ch. 1 - Ch. 2) Connect your line level devices to these TRS jack connector: tip=Hot, ring=Cold, sleeve=Earth. These inputs are suitable for
external pre‑amplifier and DI‑boxes. Gain scale +15 dB/‑35 dB.
GAIN (Ch. 1 - Ch. 2) This controls the level gain (0 dB/‑50 dB for microphone input and +15 dB/‑35 dB for line input when in use).
EQ
A three‑band EQ is available for
mono channels:
HI = ±15 dB@12 kHz
MID = ±15 dB@2.5 kHz
LOW = ±15 dB@80 Hz
Dual‑band EQ for stereo channels:
HI = ±15 dB@12 kHz
LOW = ±15 dB@80 Hz
PAN or BAL: This control defines the signal
stereo imaging for mono channels or left‑right
balance for stereo channels.
KNOBS Ch. 1 - Ch. 2: MONO Channels level
control
KNOBS Ch. 3/4 - Ch. 5/6: STEREO channels level
control
STEREO LINE INPUT (Ch. 3/4
- Ch. 5/6). Plug in your
keyboard, line level or stereo
devices into these balanced
TRS jacks (Tip = Hot, Ring =
Cold, Sleeve = Earth).
MAIN MIX output: Unbalanced TRS
jack. Plug in your active speakers or
main sound reinforcement system
amplifier (for passive speakers) of
here.
CONTROL ROOM output: Plug your
studio monitor or local speakers into
these TRS jacks.
AUX SEND output: Plug a wedge
stage monitor or external FX device
into this TRS jack. The processed
signal from the FX device is returned
to the RCF mixing consoles mixer via
the Stereo Return jacks.
PHONES: TRS stereo jack, Tip = Left,
Ring = Right, Sleeve = Common
Earth. Plug your headphone in here
to listen to MAIN MIX.
STEREO RETURN. Connect
signals from external devices,
such as external FX devices,
to these unbalanced jacks.
AUX POST: It is an auxiliary send, level ‑∞ to
+10 dB. The signal is routed to the AUX SEND
output jack. The signal is extracted in post‑
fader position.
2TK IN – 2TK OUT These
unbalanced RCA connectors
are suitable for connecting
audio player and recorder
devices.
5