BFT SHYRA AC SL Instructions D'installation page 24

DIP Logic Default
Photocells
5
during closing
Safety edge
6
input operation
7 Fast closing
Residential /
apartment
8
building
operation
24 -
SHYRA
INSTALLATION MANUAL
Cross out
Description
setting used
In the event beam is broken, photocell operation is disabled during opening. During closing, move-
ON
ment is reversed immediately.
OFF
When
OFF sing. When beam is broken during closing, movement is reversed only once the
photocell is cleared.
ON Safety edge with active reversal only when closing, when opening the movement stops
OFF
OFF Safety edge with active reversal in both directions
SHYRA AC SL
Closes 3 seconds after the photocells are cleared before waiting for the set TCA to elapse.
ON
OFF SHYRA AC BA
Closes 1 second after the photocells are cleared before waiting for the set TCA to elapse.
OFF Logic not enabled
Sets the
automation type
ON
of operation:
ON = Apartment building
OFF
OFF OFF = Residential
beam is broken, photocells
Reaction to the START input (wired or radio):
CLOSED
WHILE CLOSINg
OPEN
WHILE OPENINg
AFTER STOP
Reaction to the OPEN input (wired):
CLOSED
WHILE CLOSINg
OPEN
WHILE OPENINg
AFTER STOP
Reaction to the PEDESTRIAN input (radio):
CLOSED
WHILE CLOSINg
OPEN
WHILE OPENINg
AFTER STOP
are active during both
Residential Apartment building
Opens Opens
Stops Opens
Closes Closes
STOPS + TCA No effect
Opens Opens
Residential Apartment building
Opens Opens
Opens Opens
No effect No effect
Keeps it open Keeps it open
Opens Opens
Residential Apartment building
Opens partially Opens partially
Stops Opens partially
Closes Closes
STOPS + TCA No effect
Opens partially Opens partially
opening and clo-